Deemount Bicycle Headlight EOS520 1000Lm 4800mAH Side Red Light Power Bank Aluminum Housing Type-C Charge Sturdy Alloy Bracket

Features

- Sturdily built for cycling lighting, aluminum alloy housing, aluminum bracket; - Up to 1000 lumen illumination, clear view of road conditions; - Special reflector, shaping 125 degree flood illumination, dazzle reduced; - Quality battery 4800mAH supports burning time up to 11 hours; - Firm install, quick mount & release system, simple operation.

Specifications

- Light source: 1 * LED bead, Daylight Tone - Beam angle: 125 degree; Light output: Up to 1000LM; 5 light modes - Battery: 3.7V/4800mAH; Runtime: 3-11Hrs - Charging: 5V 2A Max. about 5hrs to full charge - Output: 5V (As power bank to charge other items) - Ingress protection: water splash proof; Do not submerge in water to use - Material: Mainly aluminum housing, aluminum bracket; - Mount: Fits Dia. 21.8-32mm - Size: 97*41*26mm - Net weight: Approx. 185Grams (Lamp head 159g, bracket 26g)

Features:

- Designed to conform to the center channel and bead locking rim bed; - Creates an air-tight seal between the tire and rim bed; - Good stretch and seal, non-porous, will not affect tire fit; - Made of compound material, not as stiff as Nylon or Acrylic options; - Adhesive specifically formulated to adhere evenly for long lasting hold; - Does not leave a messy residue when it needs to be replaced; - Ultra light in weight, barely increase weight load for light biking; - Comes in length of around 10meters, enough for two wraps at a set of wheels.

Specifications:

- Item: Tubeless Bicycle Wheel Rim Tape - Backing film: Polyester; Tensilized strapping - Adhesive: Single sided; synthetic rubber adhesive - Type: Pressure Sensitive - Thickness: Approx. 0.12mm - Size: Width per order option - Length: Approx. 10 meters - Application: Clean rim bed with alcohol, tightly wrap rim bed 2×overlap at valve stem, and puncture hole for valve stem

Tape Length on Rim for reference:

1. 26 inch rim, D0.559m*3.14=1.76m (Circumference), around 2 meters needed for 1 rim including the overlap at valve stem 2. 27.5 inch rim, D0.584m*3.14=1.83m (Circumference), around 2.1 meters needed for 1 rim including the overlap at valve stem 3. 29 inch & 700C, D0.622*3.14=1.95m (Circumference), around 2.3 meters for 1 rim including the overlap at valve stem

Package include:

1 * Roll of tape

Features:

•3W genuine CREE red LED as light source, high illumination •Eye-shaped lens diffuser, lux level much strengthened •Visual warning at long distance or fog weather •800mAH Li-polymer battery embedded, USB Rechargeable •Rain water proof design •Quick release mount, vertical or horizontal install, angle adjustable

Specifications:

•Light source: 1*3W LED CREE chip •Color: Red Light •Beam Angle: 120 degree chip, 150 degree visible •Mode: 3 modes (High, Standard, Pop Flash) •Switch: Press button •Battery: Li-polymer battery embedded, 800mAH •Charging: USB charge (Android type port), 5V 1A max •Indication: Red light when charging, turns green when fully charged •Ingress protection: Rain water proof. Do not use in water •Material: ABS plastic, electronic devices •Net weight: About 63grams •Applicable: Fits 22-32mm tube •Packing: Retail box

Package includes:

1PC Tail light with mount bracket 1PC USB line

Features

- As rack stand for install on helmet; - For items with GoPro or identical adaption items; - Well-structured to match contour on top of helmet; - Choice material, durable use, safe stay; - Light weight, mini load on head.

Specifications

- Item: Helmet Mount - Material: Engineering Plastic, Nylon, Aluminum - Adaption: For GoPro or identical adaption - Band: L37*W2.5cm - Bandage Scope: Perimeter 12-36cm - Net Weight: Approx. 30grams

Note

This stand is NOT universal to fit all helmets. Please be noted of the helmet cavity size and structure before purchase.